[arrl-odv:29728] Inexpensive Kit
To the Board: I refer you to https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U 2/ref=as_li_ss_tl?ie=UTF8 <https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4 U2/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=cnetdeals_nl-20&linkId=a1d3eb66b afe4538dff5e7390d1c9cc2&language=en_US&ascsubtag=ag%3A-%7Cvg%3A___VIEW_GUID_ __%7Cst%3Adtp> &linkCode=ll1&tag=cnetdeals_nl-20&linkId=a1d3eb66bafe4538dff5e7390d1c9cc2&la nguage=en_US&ascsubtag=ag%3A-%7Cvg%3A___VIEW_GUID___%7Cst%3Adtp This is an FM radio kit, with soldering iron, solder, safety glasses, and side cutters, all for just $22.99. It is my impression that kit building at regional conventions has been an enormous success. W1UE (our CAC Chairman) told me just this past week that he built a kit at the desk at the Orlando Hamfest, and he loved it! I wonder if the Board of Directors should be encouraging a series of ARRL kits, similarly simple, similarly low-priced - for example: . 2 m FM receiver, . Short-wave receiver, . UHF Transmitter with camera for balloon experiments, . 40 m or 30 m CW receiver, . 40 m or 30 m QRP transmitter, . T/R switch for the above to make them into a transceiver, . End-fed-half-wave antenna tuner, (with instructions on how to make a SOTA station out of the latter four kits), . A Blue Tooth adapter for transceivers and HT's to use with headsets, . A USB-stick SDR receiver controllable with ARRL software for an iPad, netbook, Raspberry Pi, cell-phone, etc., for listening to ham bands, . A USB-stick SDR receiver for listening to digital TV in the car (plugging into the AUX jack) Maybe we are doing some of this already (but http://www.arrl.org/shop/Kits/ displays a fairly meager offering - and the CW Cub Transceiver kit is $105.95), but we are not packaging a major line of really low-priced kits with an ARRL Diamond brand. My idea is a branded series of kits, that are compatible with one another, all low-priced. If it is outside of ARRL's ability to develop such a series in the lab, could we solicit designs in our annual design contest? Or coordinate with a kit manufacturer (MFJ? An existing kit company such Elenco, Digi-key, Giga-Parts, QRP Labs, Pacific Antenna, QRPGuys, Bliss Radio, uBITX, 4sqrp, etc.?) for an ARRL-branded product line (and benefitting ARRL with commissions)? I note that Ramsey Electronics has disappeared after 40 years, having sold a zillion kits, see https://qrznow.com/ramsey-electronics-shuts-down-its-hobby-kits-division/. But the death of Ramsey may be sui generis, and related to the fact that they were previously raided by the feds, see https://yro.slashdot.org/story/00/01/04/2316228/the-feds-ramsey-electronics- raid-blow-by-blow. The concept of a branded product was proven with the Eton/Grundig Hand Turbine AM/FM/Weather Radio, https://www.ebay.com/c/1633862185, which sells for <$20 and contributes $1 for each radio sold directly to the American Red Cross, if I recall correctly (I may not). We have scads of retired engineers who might love to get involved in creating low-priced kits. I suggest that we could rally a battalion, or put the idea out to bid with the hobby-kit companies mentioned above. I suggest consideration of such a program by our Programs & Services Committee. ARRL publishes books in competition with other publishers. How can we NOT be a leader in the "introduction to ham radio devices" kit world? Fred Hopengarten, Esq. K1VR Six Willarch Road Lincoln, MA 01773 781.259.0088, k1vr@arrl.org New England Director cid:a4a12f0b-0468-4a39-b953-31b2a3da8564 Serving ME, NH, VT, MA, RI and CT
The D.A.R.C. put together a series of do-it-yourself kits designed to interest a range of youngsters as young as age 6. They have had supervised tables at Friedrichshafen (HAM RADIO) where kids learn basic soldering skills building an age-appropriate kit. At the following link are several pictures of the D.A.R.C. kits. It might be worthwhile to review their experiences and kits for some ideas to jumpstart this idea, what has worked and what hasn’t, at least in Germany. Pictures: https://tinyurl.com/wy33wqd. Same thing at the YOTA camps in IARU Region 1. This is an older group, generally ages 18-26, already with their licenses. (Some European countries have a minimum age of 14 or 16 for ham licenses, it is a problem that they are working on with regulators.) There usually is one or more kit-building exercise during the week so everyone can take something useful home. It varies with the capabilities of the host society, and ranges from antennas that the kids then use to make QSOs, to Raspberry Pi programming and filter building for WSPR transmitters. For example, several years ago each team built WSPR transmitters from Raspberry Pi’s and after returning home there was a contest to see whose WSPR would reach the farthest. For an idea of the kit-building activities at YOTA, Lisa PA2LS is great and would know what they have tried, and results, over the years. For example, a short video of the kids building antennas and their Raspberry Pi and filter kits at the 2016 YOTA is at this link: https://vimeo.com/175276493. This may help with some ideas, whoever is pursuing this. These are just two of the ham youth activities I came across in Europe several years ago that I found interesting. 73, Dave K3ZJ From: arrl-odv <arrl-odv-bounces@reflector.arrl.org> on behalf of Fred Hopengarten <k1vr@arrl.org> Reply-To: Fred Hopengarten <hopengarten@post.harvard.edu> Date: Monday, February 24, 2020 at 5:34 PM To: arrl-odv <arrl-odv@reflector.arrl.org> Subject: [arrl-odv:29728] Inexpensive Kit To the Board: I refer you to https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U... This is an FM radio kit, with soldering iron, solder, safety glasses, and side cutters, all for just $22.99. It is my impression that kit building at regional conventions has been an enormous success. W1UE (our CAC Chairman) told me just this past week that he built a kit at the desk at the Orlando Hamfest, and he loved it! I wonder if the Board of Directors should be encouraging a series of ARRL kits, similarly simple, similarly low-priced – for example: * 2 m FM receiver, * Short-wave receiver, * UHF Transmitter with camera for balloon experiments, * 40 m or 30 m CW receiver, * 40 m or 30 m QRP transmitter, * T/R switch for the above to make them into a transceiver, * End-fed-half-wave antenna tuner, (with instructions on how to make a SOTA station out of the latter four kits), * A Blue Tooth adapter for transceivers and HT’s to use with headsets, * A USB-stick SDR receiver controllable with ARRL software for an iPad, netbook, Raspberry Pi, cell-phone, etc., for listening to ham bands, * A USB-stick SDR receiver for listening to digital TV in the car (plugging into the AUX jack) Maybe we are doing some of this already (but http://www.arrl.org/shop/Kits/ displays a fairly meager offering – and the CW Cub Transceiver kit is $105.95), but we are not packaging a major line of really low-priced kits with an ARRL Diamond brand. My idea is a branded series of kits, that are compatible with one another, all low-priced. If it is outside of ARRL’s ability to develop such a series in the lab, could we solicit designs in our annual design contest? Or coordinate with a kit manufacturer (MFJ? An existing kit company such Elenco, Digi-key, Giga-Parts, QRP Labs, Pacific Antenna, QRPGuys, Bliss Radio, uBITX, 4sqrp, etc.?) for an ARRL-branded product line (and benefitting ARRL with commissions)? I note that Ramsey Electronics has disappeared after 40 years, having sold a zillion kits, see https://qrznow.com/ramsey-electronics-shuts-down-its-hobby-kits-division/. But the death of Ramsey may be sui generis, and related to the fact that they were previously raided by the feds, see https://yro.slashdot.org/story/00/01/04/2316228/the-feds-ramsey-electronics-.... The concept of a branded product was proven with the Eton/Grundig Hand Turbine AM/FM/Weather Radio, https://www.ebay.com/c/1633862185, which sells for <$20 and contributes $1 for each radio sold directly to the American Red Cross, if I recall correctly (I may not). We have scads of retired engineers who might love to get involved in creating low-priced kits. I suggest that we could rally a battalion, or put the idea out to bid with the hobby-kit companies mentioned above. I suggest consideration of such a program by our Programs & Services Committee. ARRL publishes books in competition with other publishers. How can we NOT be a leader in the “introduction to ham radio devices” kit world? Fred Hopengarten, Esq. K1VR Six Willarch Road Lincoln, MA 01773 781.259.0088, k1vr@arrl.org New England Director [cid:a4a12f0b-0468-4a39-b953-31b2a3da8564] Serving ME, NH, VT, MA, RI and CT
I’ve just looked at the K3ZJ-cited “short video of the kids building antennas and their Raspberry Pi and filter kits at the 2016 YOTA is at this link: https://vimeo.com/175276493.” If that doesn’t encourage a youngster’s interest in STEM, then I suggest that kid may grow up to be a banker/lawyer/performer/artist, or somesuch. It is a pretty damn exciting video, and includes a cameo of Lisa, PA2LS. Can we find out if she’s coming to Xenia this year? Or perhaps arrange for PSC to interview her by ZOOM conference call, to, as K3ZJ suggests, learn “what they have tried, and results, over the years.” By the way, take a look at the really extensive line up of “unique ham radio kits for the budget minded” created by QRPguys (they are a whole team!) www.qrpguys.com The QRPGuys… Ken LoCasale (WA4MNT) – mechanical design, pc board layout, documentation, website maintenance Doug Hendricks (KI6DS) – logistic support, beta testing, kitting John Stevens (K5JS) – website assistance, beta testing Steve Weber (KD1JV) – circuit design Dan Tayloe (N7VE) – circuit design Wim (SP5DDJ) – Lidia Receiver Cliff Donley (K8TND) – Regen, DC Receiver, Multi Receiver Splitter, AirBand Regen, AM BCB Receiver, Sferics Receiver I do hope PSC will pick up this ball. -Fred K1VR From: arrl-odv [mailto:arrl-odv-bounces@reflector.arrl.org] On Behalf Of david davidsiddall-law.com Sent: Monday, February 24, 2020 10:15 PM To: arrl-odv Cc: hopengarten@post.harvard.edu Subject: [arrl-odv:29733] Re: Inexpensive Kit The D.A.R.C. put together a series of do-it-yourself kits designed to interest a range of youngsters as young as age 6. They have had supervised tables at Friedrichshafen (HAM RADIO) where kids learn basic soldering skills building an age-appropriate kit. At the following link are several pictures of the D.A.R.C. kits. It might be worthwhile to review their experiences and kits for some ideas to jumpstart this idea, what has worked and what hasn’t, at least in Germany. Pictures: https://tinyurl.com/wy33wqd. Same thing at the YOTA camps in IARU Region 1. This is an older group, generally ages 18-26, already with their licenses. (Some European countries have a minimum age of 14 or 16 for ham licenses, it is a problem that they are working on with regulators.) There usually is one or more kit-building exercise during the week so everyone can take something useful home. It varies with the capabilities of the host society, and ranges from antennas that the kids then use to make QSOs, to Raspberry Pi programming and filter building for WSPR transmitters. For example, several years ago each team built WSPR transmitters from Raspberry Pi’s and after returning home there was a contest to see whose WSPR would reach the farthest. For an idea of the kit-building activities at YOTA, Lisa PA2LS is great and would know what they have tried, and results, over the years. For example, a short video of the kids building antennas and their Raspberry Pi and filter kits at the 2016 YOTA is at this link: https://vimeo.com/175276493. This may help with some ideas, whoever is pursuing this. These are just two of the ham youth activities I came across in Europe several years ago that I found interesting. 73, Dave K3ZJ From: arrl-odv <arrl-odv-bounces@reflector.arrl.org> on behalf of Fred Hopengarten <k1vr@arrl.org> Reply-To: Fred Hopengarten <hopengarten@post.harvard.edu> Date: Monday, February 24, 2020 at 5:34 PM To: arrl-odv <arrl-odv@reflector.arrl.org> Subject: [arrl-odv:29728] Inexpensive Kit To the Board: I refer you to https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U... <https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U2/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=cnetdeals_nl-20&linkId=a1d3eb66bafe4538dff5e7390d1c9cc2&language=en_US&ascsubtag=ag%3A-%7Cvg%3A___VIEW_GUID___%7Cst%3Adtp> &linkCode=ll1&tag=cnetdeals_nl-20&linkId=a1d3eb66bafe4538dff5e7390d1c9cc2&language=en_US&ascsubtag=ag%3A-%7Cvg%3A___VIEW_GUID___%7Cst%3Adtp This is an FM radio kit, with soldering iron, solder, safety glasses, and side cutters, all for just $22.99. It is my impression that kit building at regional conventions has been an enormous success. W1UE (our CAC Chairman) told me just this past week that he built a kit at the desk at the Orlando Hamfest, and he loved it! I wonder if the Board of Directors should be encouraging a series of ARRL kits, similarly simple, similarly low-priced – for example: * 2 m FM receiver, * Short-wave receiver, * UHF Transmitter with camera for balloon experiments, * 40 m or 30 m CW receiver, * 40 m or 30 m QRP transmitter, * T/R switch for the above to make them into a transceiver, * End-fed-half-wave antenna tuner, (with instructions on how to make a SOTA station out of the latter four kits), * A Blue Tooth adapter for transceivers and HT’s to use with headsets, * A USB-stick SDR receiver controllable with ARRL software for an iPad, netbook, Raspberry Pi, cell-phone, etc., for listening to ham bands, * A USB-stick SDR receiver for listening to digital TV in the car (plugging into the AUX jack) Maybe we are doing some of this already (but http://www.arrl.org/shop/Kits/ displays a fairly meager offering – and the CW Cub Transceiver kit is $105.95), but we are not packaging a major line of really low-priced kits with an ARRL Diamond brand. My idea is a branded series of kits, that are compatible with one another, all low-priced. If it is outside of ARRL’s ability to develop such a series in the lab, could we solicit designs in our annual design contest? Or coordinate with a kit manufacturer (MFJ? An existing kit company such Elenco, Digi-key, Giga-Parts, QRP Labs, Pacific Antenna, QRPGuys, Bliss Radio, uBITX, 4sqrp, etc.?) for an ARRL-branded product line (and benefitting ARRL with commissions)? I note that Ramsey Electronics has disappeared after 40 years, having sold a zillion kits, see https://qrznow.com/ramsey-electronics-shuts-down-its-hobby-kits-division/. But the death of Ramsey may be sui generis, and related to the fact that they were previously raided by the feds, see https://yro.slashdot.org/story/00/01/04/2316228/the-feds-ramsey-electronics-.... The concept of a branded product was proven with the Eton/Grundig Hand Turbine AM/FM/Weather Radio, https://www.ebay.com/c/1633862185, which sells for <$20 and contributes $1 for each radio sold directly to the American Red Cross, if I recall correctly (I may not). We have scads of retired engineers who might love to get involved in creating low-priced kits. I suggest that we could rally a battalion, or put the idea out to bid with the hobby-kit companies mentioned above. I suggest consideration of such a program by our Programs & Services Committee. ARRL publishes books in competition with other publishers. How can we NOT be a leader in the “introduction to ham radio devices” kit world? Fred Hopengarten, Esq. K1VR Six Willarch Road Lincoln, MA 01773 781.259.0088, k1vr@arrl.org New England Director cid:a4a12f0b-0468-4a39-b953-31b2a3da8564 Serving ME, NH, VT, MA, RI and CT
Fred, I’ve never seen Lisa at Dayton, but she always is at Ham Radio in Friedrichshafen – she moderates the annual YOTA meeting there on Saturday morning. There also are 2016 (and other years) camp participants who would discuss the experience from their perspective. 2016 was the year that YOTA tried to reach out and spread the idea. They invited two representatives from each of IARU Regions 2 and 3. YASME contributed funds to help send Sam, KC2LRC and Sterling, N0SSC to attend that camp. They both are active, usually at Dayton, and involved with the Dayton YOTA effort later this year. Two other Austria YOTA 2016 participants also have become prominent “in the game”. After the 2016 camp participants Tomi, HA8RT, and Philipp, DK6SP, became active in the IARU Reg. 1 YCP (young contesters program) and now are active in contesting. They operated together as a youth team at WRTC-2018; and this May, they will be part of a team for WPX CW at K3LR (with your friend Marty NN1C, and another WRTC 2018 youth team, KG5HVO and CE2LR). So there’s all sorts of people who can give first-hand accounts and share their thoughts about what works and what doesn’t. 73, Dave From: Fred Hopengarten <k1vr@arrl.org> Reply-To: Fred Hopengarten <hopengarten@post.harvard.edu> Date: Tuesday, February 25, 2020 at 12:34 AM To: "david@davidsiddall-law.com" <david@davidsiddall-law.com>, 'arrl-odv' <arrl-odv@reflector.arrl.org> Subject: RE: [arrl-odv:29733] Re: Inexpensive Kit I’ve just looked at the K3ZJ-cited “short video of the kids building antennas and their Raspberry Pi and filter kits at the 2016 YOTA is at this link: https://vimeo.com/175276493.” If that doesn’t encourage a youngster’s interest in STEM, then I suggest that kid may grow up to be a banker/lawyer/performer/artist, or somesuch. It is a pretty damn exciting video, and includes a cameo of Lisa, PA2LS. Can we find out if she’s coming to Xenia this year? Or perhaps arrange for PSC to interview her by ZOOM conference call, to, as K3ZJ suggests, learn “what they have tried, and results, over the years.” By the way, take a look at the really extensive line up of “unique ham radio kits for the budget minded” created by QRPguys (they are a whole team!) www.qrpguys.com<http://www.qrpguys.com> The QRPGuys… Ken LoCasale (WA4MNT) – mechanical design, pc board layout, documentation, website maintenance Doug Hendricks (KI6DS) – logistic support, beta testing, kitting John Stevens (K5JS) – website assistance, beta testing Steve Weber (KD1JV) – circuit design Dan Tayloe (N7VE) – circuit design Wim (SP5DDJ) – Lidia Receiver Cliff Donley (K8TND) – Regen, DC Receiver, Multi Receiver Splitter, AirBand Regen, AM BCB Receiver, Sferics Receiver I do hope PSC will pick up this ball. -Fred K1VR From: arrl-odv [mailto:arrl-odv-bounces@reflector.arrl.org] On Behalf Of david davidsiddall-law.com Sent: Monday, February 24, 2020 10:15 PM To: arrl-odv Cc: hopengarten@post.harvard.edu Subject: [arrl-odv:29733] Re: Inexpensive Kit The D.A.R.C. put together a series of do-it-yourself kits designed to interest a range of youngsters as young as age 6. They have had supervised tables at Friedrichshafen (HAM RADIO) where kids learn basic soldering skills building an age-appropriate kit. At the following link are several pictures of the D.A.R.C. kits. It might be worthwhile to review their experiences and kits for some ideas to jumpstart this idea, what has worked and what hasn’t, at least in Germany. Pictures: https://tinyurl.com/wy33wqd. Same thing at the YOTA camps in IARU Region 1. This is an older group, generally ages 18-26, already with their licenses. (Some European countries have a minimum age of 14 or 16 for ham licenses, it is a problem that they are working on with regulators.) There usually is one or more kit-building exercise during the week so everyone can take something useful home. It varies with the capabilities of the host society, and ranges from antennas that the kids then use to make QSOs, to Raspberry Pi programming and filter building for WSPR transmitters. For example, several years ago each team built WSPR transmitters from Raspberry Pi’s and after returning home there was a contest to see whose WSPR would reach the farthest. For an idea of the kit-building activities at YOTA, Lisa PA2LS is great and would know what they have tried, and results, over the years. For example, a short video of the kids building antennas and their Raspberry Pi and filter kits at the 2016 YOTA is at this link: https://vimeo.com/175276493. This may help with some ideas, whoever is pursuing this. These are just two of the ham youth activities I came across in Europe several years ago that I found interesting. 73, Dave K3ZJ From: arrl-odv <arrl-odv-bounces@reflector.arrl.org> on behalf of Fred Hopengarten <k1vr@arrl.org> Reply-To: Fred Hopengarten <hopengarten@post.harvard.edu> Date: Monday, February 24, 2020 at 5:34 PM To: arrl-odv <arrl-odv@reflector.arrl.org> Subject: [arrl-odv:29728] Inexpensive Kit To the Board: I refer you to https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U... This is an FM radio kit, with soldering iron, solder, safety glasses, and side cutters, all for just $22.99. It is my impression that kit building at regional conventions has been an enormous success. W1UE (our CAC Chairman) told me just this past week that he built a kit at the desk at the Orlando Hamfest, and he loved it! I wonder if the Board of Directors should be encouraging a series of ARRL kits, similarly simple, similarly low-priced – for example: * 2 m FM receiver, * Short-wave receiver, * UHF Transmitter with camera for balloon experiments, * 40 m or 30 m CW receiver, * 40 m or 30 m QRP transmitter, * T/R switch for the above to make them into a transceiver, * End-fed-half-wave antenna tuner, (with instructions on how to make a SOTA station out of the latter four kits), * A Blue Tooth adapter for transceivers and HT’s to use with headsets, * A USB-stick SDR receiver controllable with ARRL software for an iPad, netbook, Raspberry Pi, cell-phone, etc., for listening to ham bands, * A USB-stick SDR receiver for listening to digital TV in the car (plugging into the AUX jack) Maybe we are doing some of this already (but http://www.arrl.org/shop/Kits/ displays a fairly meager offering – and the CW Cub Transceiver kit is $105.95), but we are not packaging a major line of really low-priced kits with an ARRL Diamond brand. My idea is a branded series of kits, that are compatible with one another, all low-priced. If it is outside of ARRL’s ability to develop such a series in the lab, could we solicit designs in our annual design contest? Or coordinate with a kit manufacturer (MFJ? An existing kit company such Elenco, Digi-key, Giga-Parts, QRP Labs, Pacific Antenna, QRPGuys, Bliss Radio, uBITX, 4sqrp, etc.?) for an ARRL-branded product line (and benefitting ARRL with commissions)? I note that Ramsey Electronics has disappeared after 40 years, having sold a zillion kits, see https://qrznow.com/ramsey-electronics-shuts-down-its-hobby-kits-division/. But the death of Ramsey may be sui generis, and related to the fact that they were previously raided by the feds, see https://yro.slashdot.org/story/00/01/04/2316228/the-feds-ramsey-electronics-.... The concept of a branded product was proven with the Eton/Grundig Hand Turbine AM/FM/Weather Radio, https://www.ebay.com/c/1633862185, which sells for <$20 and contributes $1 for each radio sold directly to the American Red Cross, if I recall correctly (I may not). We have scads of retired engineers who might love to get involved in creating low-priced kits. I suggest that we could rally a battalion, or put the idea out to bid with the hobby-kit companies mentioned above. I suggest consideration of such a program by our Programs & Services Committee. ARRL publishes books in competition with other publishers. How can we NOT be a leader in the “introduction to ham radio devices” kit world? Fred Hopengarten, Esq. K1VR Six Willarch Road Lincoln, MA 01773 781.259.0088, k1vr@arrl.org New England Director [cid:a4a12f0b-0468-4a39-b953-31b2a3da8564] Serving ME, NH, VT, MA, RI and CT
Fred et al: The ARRL kit-building experience you mentioned at the Orlando HamCation, was organized by the ARRL to help support our interest in committing to a kit design and to test other organizing elements for a successful activity including materials, supplies, and even volunteer support. Over 150 kits were completed by all ages and skill level (some hams and some not). See photos: https://www.facebook.com/ARRL.org/posts/10157285240707408. We are organizing a similar effort for Dayton Hamvention. Our efforts to advance an intro-to-radio kit have been reported in In News and as recently as the February Second Century QST editorial, inviting members to share their suggestions with us by writing Product Development Manager Bob Inderbitzen, NQ1R. The effort is also cited in the 2020/21 plan (Departmental Plans p.31): "...we are exploring new products and resources to help members develop meaningful interactions through their outreach activities to introduce radio communications to others. This effort includes the creation of an 'introduction-to-radio kit' that can be used by anyone to learn about basic radio principles." Bob Inderbitzen has attended conventions around the country, and has seen a lot of examples (both good and bad) of member-volunteers organizing kit building experiences. Many of these lack any introduction to radio electronics (CPOs, flashing LED kits, etc. introduce basic electronics, but not RADIO electronics). Our efforts will be intended to introduce radio: how does radio work, radio communications, and radio electronics. We expect this effort will lead to multiple kit offerings and companion instructional (learning) materials. The most basic of these kits will include STEM-based lesson plans, similar to the curated projects found on the IEEE TryEngineering website: www.tryengineering.org/teachers/, and those produced by AOPA's Foundation for a High School Stem Curriculum for aviation: www.youcanfly.aopa.org/high-school/high-school-curriculum (see example: Wind Tunnel Lesson Plan). Bob has also reviewed the marketplace for similar offerings, much like the kit Fred found on Amazon. We've obtained sample kits from Maxitronix (available from Amazon): crystal radio, FM radio, and shortwave radio. Our goal is to produce something similar - and even better. Can you imagine an intro-to-radio kit offering on Amazon produced by ARRL, the national association for Amateur Radio? That would be the ultimate goal, but in the meantime, we would give thousands of potential radio amateurs their introduction to the science of radio. I've attached to this message a CONFIDENTIAL proposal drafted by Bob for the management counsel last November. This outlines our overall goals and objectives for a new product ARRL's Build a Radio Kit. This is the ultimate goal to which our efforts to date are leading. I would appreciate this being kept confidential. You can direct any questions to myself or Bob. We're all on the same page here, and I wanted this group to know that we're working on it. 73, Barry, N1VXY From: arrl-odv <arrl-odv-bounces@reflector.arrl.org> On Behalf Of Fred Hopengarten Sent: Monday, February 24, 2020 5:35 PM To: arrl-odv <arrl-odv@reflector.arrl.org> Subject: [arrl-odv:29728] Inexpensive Kit To the Board: I refer you to https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U... This is an FM radio kit, with soldering iron, solder, safety glasses, and side cutters, all for just $22.99. It is my impression that kit building at regional conventions has been an enormous success. W1UE (our CAC Chairman) told me just this past week that he built a kit at the desk at the Orlando Hamfest, and he loved it! I wonder if the Board of Directors should be encouraging a series of ARRL kits, similarly simple, similarly low-priced - for example: * 2 m FM receiver, * Short-wave receiver, * UHF Transmitter with camera for balloon experiments, * 40 m or 30 m CW receiver, * 40 m or 30 m QRP transmitter, * T/R switch for the above to make them into a transceiver, * End-fed-half-wave antenna tuner, (with instructions on how to make a SOTA station out of the latter four kits), * A Blue Tooth adapter for transceivers and HT's to use with headsets, * A USB-stick SDR receiver controllable with ARRL software for an iPad, netbook, Raspberry Pi, cell-phone, etc., for listening to ham bands, * A USB-stick SDR receiver for listening to digital TV in the car (plugging into the AUX jack) Maybe we are doing some of this already (but http://www.arrl.org/shop/Kits/ displays a fairly meager offering - and the CW Cub Transceiver kit is $105.95), but we are not packaging a major line of really low-priced kits with an ARRL Diamond brand. My idea is a branded series of kits, that are compatible with one another, all low-priced. If it is outside of ARRL's ability to develop such a series in the lab, could we solicit designs in our annual design contest? Or coordinate with a kit manufacturer (MFJ? An existing kit company such Elenco, Digi-key, Giga-Parts, QRP Labs, Pacific Antenna, QRPGuys, Bliss Radio, uBITX, 4sqrp, etc.?) for an ARRL-branded product line (and benefitting ARRL with commissions)? I note that Ramsey Electronics has disappeared after 40 years, having sold a zillion kits, see https://qrznow.com/ramsey-electronics-shuts-down-its-hobby-kits-division/. But the death of Ramsey may be sui generis, and related to the fact that they were previously raided by the feds, see https://yro.slashdot.org/story/00/01/04/2316228/the-feds-ramsey-electronics-.... The concept of a branded product was proven with the Eton/Grundig Hand Turbine AM/FM/Weather Radio, https://www.ebay.com/c/1633862185, which sells for <$20 and contributes $1 for each radio sold directly to the American Red Cross, if I recall correctly (I may not). We have scads of retired engineers who might love to get involved in creating low-priced kits. I suggest that we could rally a battalion, or put the idea out to bid with the hobby-kit companies mentioned above. I suggest consideration of such a program by our Programs & Services Committee. ARRL publishes books in competition with other publishers. How can we NOT be a leader in the "introduction to ham radio devices" kit world? Fred Hopengarten, Esq. K1VR Six Willarch Road Lincoln, MA 01773 781.259.0088, k1vr@arrl.org<mailto:k1vr@arrl.org> New England Director [cid:a4a12f0b-0468-4a39-b953-31b2a3da8564] Serving ME, NH, VT, MA, RI and CT
I am absolutely delighted to learn about what you've described below, Barry. I am especially pleased to learn that thought has been put into STEM-based lesson plans and an integrated program. I was unaware of the Inderbitzen proposal to the management counsel. I wrote: How can we NOT be a leader in the "introduction to ham radio devices" kit world? You wrote: Can you imagine an intro-to-radio kit offering on Amazon produced by ARRL, the national association for Amateur Radio? Sounds like we are, pardon the pun, on the same wavelength. BRAVO! As this train begins to move, I do suggest reaching out to PA2LS and pick up teams like the www.qrpguys.com group (full disclosure: I've never met, nor do I know, any of them). It seems to me that where others have strengths in design/parts/build aspects, ARRL is second to no one in publishing and teaching. I think there is a powerful combination of talents that can be assembled. So congratulations to Bob Inderbitzen on being ahead of my thinking. My kids would gladly tell you that I'm slow. Bravo! Be sure to keep the Board informed. -Fred K1VR From: arrl-odv [mailto:arrl-odv-bounces@reflector.arrl.org] On Behalf Of Shelley, Barry, N1VXY (CEO) Sent: Tuesday, February 25, 2020 10:00 AM To: hopengarten@post.harvard.edu; arrl-odv Subject: [arrl-odv:29736] Re: Inexpensive Kit Fred et al: The ARRL kit-building experience you mentioned at the Orlando HamCation, was organized by the ARRL to help support our interest in committing to a kit design and to test other organizing elements for a successful activity including materials, supplies, and even volunteer support. Over 150 kits were completed by all ages and skill level (some hams and some not). See photos: https://www.facebook.com/ARRL.org/posts/10157285240707408. We are organizing a similar effort for Dayton Hamvention. Our efforts to advance an intro-to-radio kit have been reported in In News and as recently as the February Second Century QST editorial, inviting members to share their suggestions with us by writing Product Development Manager Bob Inderbitzen, NQ1R. The effort is also cited in the 2020/21 plan (Departmental Plans p.31): ".we are exploring new products and resources to help members develop meaningful interactions through their outreach activities to introduce radio communications to others. This effort includes the creation of an 'introduction-to-radio kit' that can be used by anyone to learn about basic radio principles." Bob Inderbitzen has attended conventions around the country, and has seen a lot of examples (both good and bad) of member-volunteers organizing kit building experiences. Many of these lack any introduction to radio electronics (CPOs, flashing LED kits, etc. introduce basic electronics, but not RADIO electronics). Our efforts will be intended to introduce radio: how does radio work, radio communications, and radio electronics. We expect this effort will lead to multiple kit offerings and companion instructional (learning) materials. The most basic of these kits will include STEM-based lesson plans, similar to the curated projects found on the IEEE TryEngineering website: www.tryengineering.org/teachers/, and those produced by AOPA's Foundation for a High School Stem Curriculum for aviation: www.youcanfly.aopa.org/high-school/high-school-curriculum (see example: Wind Tunnel Lesson Plan). Bob has also reviewed the marketplace for similar offerings, much like the kit Fred found on Amazon. We've obtained sample kits from Maxitronix (available from Amazon): crystal radio, FM radio, and shortwave radio. Our goal is to produce something similar - and even better. Can you imagine an intro-to-radio kit offering on Amazon produced by ARRL, the national association for Amateur Radio? That would be the ultimate goal, but in the meantime, we would give thousands of potential radio amateurs their introduction to the science of radio. I've attached to this message a CONFIDENTIAL proposal drafted by Bob for the management counsel last November. This outlines our overall goals and objectives for a new product ARRL's Build a Radio Kit. This is the ultimate goal to which our efforts to date are leading. I would appreciate this being kept confidential. You can direct any questions to myself or Bob. We're all on the same page here, and I wanted this group to know that we're working on it. 73, Barry, N1VXY From: arrl-odv <arrl-odv-bounces@reflector.arrl.org> On Behalf Of Fred Hopengarten Sent: Monday, February 24, 2020 5:35 PM To: arrl-odv <arrl-odv@reflector.arrl.org> Subject: [arrl-odv:29728] Inexpensive Kit To the Board: I refer you to https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U 2/ref=as_li_ss_tl?ie=UTF8 <https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4 U2/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=cnetdeals_nl-20&linkId=a1d3eb66b afe4538dff5e7390d1c9cc2&language=en_US&ascsubtag=ag%3A-%7Cvg%3A___VIEW_GUID_ __%7Cst%3Adtp> &linkCode=ll1&tag=cnetdeals_nl-20&linkId=a1d3eb66bafe4538dff5e7390d1c9cc2&la nguage=en_US&ascsubtag=ag%3A-%7Cvg%3A___VIEW_GUID___%7Cst%3Adtp This is an FM radio kit, with soldering iron, solder, safety glasses, and side cutters, all for just $22.99. It is my impression that kit building at regional conventions has been an enormous success. W1UE (our CAC Chairman) told me just this past week that he built a kit at the desk at the Orlando Hamfest, and he loved it! I wonder if the Board of Directors should be encouraging a series of ARRL kits, similarly simple, similarly low-priced - for example: * 2 m FM receiver, * Short-wave receiver, * UHF Transmitter with camera for balloon experiments, * 40 m or 30 m CW receiver, * 40 m or 30 m QRP transmitter, * T/R switch for the above to make them into a transceiver, * End-fed-half-wave antenna tuner, (with instructions on how to make a SOTA station out of the latter four kits), * A Blue Tooth adapter for transceivers and HT's to use with headsets, * A USB-stick SDR receiver controllable with ARRL software for an iPad, netbook, Raspberry Pi, cell-phone, etc., for listening to ham bands, * A USB-stick SDR receiver for listening to digital TV in the car (plugging into the AUX jack) Maybe we are doing some of this already (but http://www.arrl.org/shop/Kits/ displays a fairly meager offering - and the CW Cub Transceiver kit is $105.95), but we are not packaging a major line of really low-priced kits with an ARRL Diamond brand. My idea is a branded series of kits, that are compatible with one another, all low-priced. If it is outside of ARRL's ability to develop such a series in the lab, could we solicit designs in our annual design contest? Or coordinate with a kit manufacturer (MFJ? An existing kit company such Elenco, Digi-key, Giga-Parts, QRP Labs, Pacific Antenna, QRPGuys, Bliss Radio, uBITX, 4sqrp, etc.?) for an ARRL-branded product line (and benefitting ARRL with commissions)? I note that Ramsey Electronics has disappeared after 40 years, having sold a zillion kits, see https://qrznow.com/ramsey-electronics-shuts-down-its-hobby-kits-division/. But the death of Ramsey may be sui generis, and related to the fact that they were previously raided by the feds, see https://yro.slashdot.org/story/00/01/04/2316228/the-feds-ramsey-electronics- raid-blow-by-blow. The concept of a branded product was proven with the Eton/Grundig Hand Turbine AM/FM/Weather Radio, https://www.ebay.com/c/1633862185, which sells for <$20 and contributes $1 for each radio sold directly to the American Red Cross, if I recall correctly (I may not). We have scads of retired engineers who might love to get involved in creating low-priced kits. I suggest that we could rally a battalion, or put the idea out to bid with the hobby-kit companies mentioned above. I suggest consideration of such a program by our Programs & Services Committee. ARRL publishes books in competition with other publishers. How can we NOT be a leader in the "introduction to ham radio devices" kit world? Fred Hopengarten, Esq. K1VR Six Willarch Road Lincoln, MA 01773 781.259.0088, k1vr@arrl.org New England Director cid:a4a12f0b-0468-4a39-b953-31b2a3da8564 Serving ME, NH, VT, MA, RI and CT
And here's the attachment. 73, Barry, N1VXY From: arrl-odv <arrl-odv-bounces@reflector.arrl.org> On Behalf Of Fred Hopengarten Sent: Monday, February 24, 2020 5:35 PM To: arrl-odv <arrl-odv@reflector.arrl.org> Subject: [arrl-odv:29728] Inexpensive Kit To the Board: I refer you to https://www.amazon.com/WEmake-Soldering-Cutters-Glasses-Project/dp/B01JA8B4U... This is an FM radio kit, with soldering iron, solder, safety glasses, and side cutters, all for just $22.99. It is my impression that kit building at regional conventions has been an enormous success. W1UE (our CAC Chairman) told me just this past week that he built a kit at the desk at the Orlando Hamfest, and he loved it! I wonder if the Board of Directors should be encouraging a series of ARRL kits, similarly simple, similarly low-priced - for example: * 2 m FM receiver, * Short-wave receiver, * UHF Transmitter with camera for balloon experiments, * 40 m or 30 m CW receiver, * 40 m or 30 m QRP transmitter, * T/R switch for the above to make them into a transceiver, * End-fed-half-wave antenna tuner, (with instructions on how to make a SOTA station out of the latter four kits), * A Blue Tooth adapter for transceivers and HT's to use with headsets, * A USB-stick SDR receiver controllable with ARRL software for an iPad, netbook, Raspberry Pi, cell-phone, etc., for listening to ham bands, * A USB-stick SDR receiver for listening to digital TV in the car (plugging into the AUX jack) Maybe we are doing some of this already (but http://www.arrl.org/shop/Kits/ displays a fairly meager offering - and the CW Cub Transceiver kit is $105.95), but we are not packaging a major line of really low-priced kits with an ARRL Diamond brand. My idea is a branded series of kits, that are compatible with one another, all low-priced. If it is outside of ARRL's ability to develop such a series in the lab, could we solicit designs in our annual design contest? Or coordinate with a kit manufacturer (MFJ? An existing kit company such Elenco, Digi-key, Giga-Parts, QRP Labs, Pacific Antenna, QRPGuys, Bliss Radio, uBITX, 4sqrp, etc.?) for an ARRL-branded product line (and benefitting ARRL with commissions)? I note that Ramsey Electronics has disappeared after 40 years, having sold a zillion kits, see https://qrznow.com/ramsey-electronics-shuts-down-its-hobby-kits-division/. But the death of Ramsey may be sui generis, and related to the fact that they were previously raided by the feds, see https://yro.slashdot.org/story/00/01/04/2316228/the-feds-ramsey-electronics-.... The concept of a branded product was proven with the Eton/Grundig Hand Turbine AM/FM/Weather Radio, https://www.ebay.com/c/1633862185, which sells for <$20 and contributes $1 for each radio sold directly to the American Red Cross, if I recall correctly (I may not). We have scads of retired engineers who might love to get involved in creating low-priced kits. I suggest that we could rally a battalion, or put the idea out to bid with the hobby-kit companies mentioned above. I suggest consideration of such a program by our Programs & Services Committee. ARRL publishes books in competition with other publishers. How can we NOT be a leader in the "introduction to ham radio devices" kit world? Fred Hopengarten, Esq. K1VR Six Willarch Road Lincoln, MA 01773 781.259.0088, k1vr@arrl.org<mailto:k1vr@arrl.org> New England Director [cid:a4a12f0b-0468-4a39-b953-31b2a3da8564] Serving ME, NH, VT, MA, RI and CT
participants (3)
-
david davidsiddall-law.com -
Fred Hopengarten -
Shelley, Barry, N1VXY (CEO)