I’ve already independently replicated this work with software I wrote myself. I have a couple of loaner modems. I’m currently working on decoding in the face of missing frames and enabling diversity receive frame integration. Work on this is slow for me at the moment because of the demands of my day job. Sent from my iPad
On Oct 12, 2019, at 9:27 AM, Michael Ritz <w7vo@comcast.net> wrote:
FYI; Note that it apparently doesn't decode PACTOR 4, but maybe that's only because that version's not legal here yet.
Ria, any comment on this?
Mike
W7VO
---------- Original Message ---------- From: W7SLS - Scott Scheirman <w7sls.scott@gmail.com> To: Michael Ritz <w7vo@comcast.net> Date: October 12, 2019 at 9:19 AM Subject: Fwd: [winlink_for_emcomm] PMON Monitoring Program
This has been possible for a long time, but this may be the easiest turnkey solution
Scott W7SLS
Sent from my iPhone
Begin forwarded message:
From: Lor W3QA <lor.kutchins@gmail.com> Date: October 12, 2019 at 9:13:12 AM PDT To: Winlink_For_EmComm <winlink_for_emcomm@googlegroups.com> Subject: [winlink_for_emcomm] PMON Monitoring Program Reply-To: winlink_for_emcomm@googlegroups.com
PMON - An Independent Pactor/Winlink Monitor For The Raspberry Pi
Configure SCS, the company that created Pactor, has released software for Linux to allow over-the-air monitoring of Pactor 1/2/3 transmissions for meaning. Besides monitoring Pactor 1/2/3, PMON automatically decompresses B2F/LZHUF compressed messages on the fly. This is very useful for monitoring Winlink email transfers. The program requires only minimal hardware: an inexpensive Raspberry Pi 3 Model B+ (minimum) computer and an inexpensive USB sound device. An SCS Pactor modem is not needed.
The program is a free download for radio amateurs from a Linux repository provided by SCS. Easy-to-follow instructions, program information and documentation are provided on this SCS web page.
Thank you to John Huggins and Gordon Gibby, MD for their original decoding programs, and to Hans-Peter Helfert and the SCS team for this needed contribution to the amateur radio community!
--The Winlink Development Team
-- You received this message because you are subscribed to the Google Groups "Winlink_For_EmComm" group. To unsubscribe from this group and stop receiving emails from it, send an email to winlink_for_emcomm+unsubscribe@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/winlink_for_emcomm/fe3f1a9e-55e6-4ff6-b3d0....
_______________________________________________ arrl-odv mailing list arrl-odv@reflector.arrl.org https://reflector.arrl.org/mailman/listinfo/arrl-odv