Chris,
Did the ARRL receive notice about this license before it was granted?
Thanks!
73, Tom – W3TOM
From: arrl-odv [mailto:arrl-odv-bounces@
reflector.arrl.org ] On Behalf Of Christopher Imlay
Sent: Wednesday, February 7, 2018 11:44 AM
To: John Robert Stratton <N5AUS@n5aus.com>
Cc: arrl-odv <arrl-odv@reflector.arrl.org>
Subject: [arrl-odv:27067] Re: Electrical Transmission Using The "Zenneck Surface Wave"
This experimental is not that simple, actually. Here is an excerpt from the narrative from the application.
The EMC Committee has been looking into this application in the past few days. If they conclude there is reason to contact the communications lawyer for the applicant, we will do so.
Texzon anticipates that the demonstrations will be non-radiating. To conduct the demonstrations, the RF power necessary to maintain the voltage to produce local fields required to launch a high velocity propagating surface wave will be utilized. The testing will not exceed 50 kW of RF input power to the surface wave launching probe at 1710 kHz. The intent is to produce a surface wave without producing any Norton ground wave radiation. Texzon believes that the EIRP will be limited to 1000 watts. Texzon will conduct other testing in the spectrum range from 1710 kHz to 1900 kHz but the input power will be less than 5 kW for those tests with EIRP limited to 100 watts or less for that testing.
Chris
On Tue, Feb 6, 2018 at 7:49 PM, John Robert Stratton <N5AUS@n5aus.com> wrote:
http://www.texzontechnologies.
com/technology/
Frequency: 1710-1900
Authorized Power: 1000 W (ERP)
______________________________
_________
John Robert Stratton
N5AUS
Vice Director
Legislative Director
West Gulf Division
Office: 512-445-6262
Cell: 512-426-2028
P.O. Box 2232
Austin, Texas 78768-2232
______________________________
_________
_______________________________________________
arrl-odv mailing list
arrl-odv@reflector.arrl.org
https://reflector.arrl.org/mailman/listinfo/arrl-odv
--