FYI; Note that it apparently doesn't decode PACTOR 4, but maybe that's only because that version's not legal here yet. Ria, any comment on this? Mike W7VO -------- Original Message ---------- From: W7SLS - Scott Scheirman <w7sls.scott@gmail.com> To: Michael Ritz <w7vo@comcast.net> Date: October 12, 2019 at 9:19 AM Subject: Fwd: [winlink_for_emcomm] PMON Monitoring Program This has been possible for a long time, but this may be the easiest turnkey solution Scott W7SLS Sent from my iPhone Begin forwarded message: From: Lor W3QA <lor.kutchins@gmail.com> Date: October 12, 2019 at 9:13:12 AM PDT To: Winlink_For_EmComm <winlink_for_emcomm@googlegroups.com> Subject: [winlink_for_emcomm] PMON Monitoring Program Reply-To: winlink_for_emcomm@googlegroups.com PMON - An Independent Pactor/Winlink Monitor For The Raspberry Pi https://winlink.org/content/pmon_independent_pactorwinlink_monitor_raspberry... Configure https://winlink.org/# SCS, the company that created Pactor, has released software for Linux to allow over-the-air monitoring of Pactor 1/2/3 transmissions for meaning. Besides monitoring Pactor 1/2/3, PMON automatically decompresses B2F/LZHUF compressed messages on the fly. This is very useful for monitoring Winlink email transfers. The program requires only minimal hardware: an inexpensive Raspberry Pi 3 Model B+ (minimum) computer and an inexpensive USB sound device. An SCS Pactor modem is not needed. The program is a free download for radio amateurs from a Linux repository provided by SCS. Easy-to-follow instructions, program information and documentation are provided on this SCS web page https://www.p4dragon.com/en/PMON.html . Thank you to John Huggins and Gordon Gibby, MD for their original decoding programs, and to Hans-Peter Helfert and the SCS team for this needed contribution to the amateur radio community! --The Winlink Development Team -- You received this message because you are subscribed to the Google Groups "Winlink_For_EmComm" group. To unsubscribe from this group and stop receiving emails from it, send an email to winlink_for_emcomm+unsubscribe@googlegroups.com mailto:winlink_for_emcomm+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/winlink_for_emcomm/fe3f1a9e-55e6-4ff6-b3d0... https://groups.google.com/d/msgid/winlink_for_emcomm/fe3f1a9e-55e6-4ff6-b3d0... .