Hello John - I agree that this needs dissemination, Ed Hare will be posting thisto the RF-Safety webpage on ARRL.ORG. I would have liked to send thisvia the "Email your Division" but alas - this is a PDF file, and the documenthas jpg files of tables and graphs..... the "Email your Division" email systemonly does ASCII ( and it is rumored to be at less than 300 baud). There has been a delay getting this posted to the Central Divisionwebsite, when it is posted either there or on the ARRL.ORG site, I will postthe link to the Central Division membership. In the meantime, I did send itto the Assistant Directors of the Division for distribution to their local clubs.ALSO - we should remind people that this FAQ will change and to look forupdates... 73, Kermit Carlson W9XA ARRL Central Division Director ARRL EMC Committee Chairman On Monday, April 26, 2021, 10:36:24 AM CDT, John Robert Stratton <n5aus@n5aus.com> wrote: All Kermit, good work. This FAQ needs to be provided to all Members. A special ARRL newsletter should be prepared and sent to the Membership that addresses this issue; it should either include this FAQ in its entirety and/or contain a link to an URL where the PDF can be read and downloaded. All the Directors need a version of this FAQ as a PDF (preferably, fancied up) that can be provided to our SMs and Club Coordinators for distribution to the Section websites and for dissemination to Clubs for inclusion in their newsletters and/or on their websites. This topic is hot amongst the Members and the lack of understanding and the rumors (mostly wrong) need to be addressed sooner rather than later. _______________________________________ John Robert Stratton N5AUS Director West Gulf Division Office: 512-445-6262 Cell: 512-426-2028 P.O. Box 2232 Austin, Texas 78768-2232 _______________________________________ ______________________________________ On 4/25/21 12:50 PM, Kermit Carlson via arrl-odv wrote: Greetings All, Please find attached the PDF of the RF Exposure Frequently Asked Questions (Version 1.3). Ed Hare and the ARRL Laboratory are the authors of this document with technical advice from Dr. Greg Lapin, N9GL, and the RF Safety Committee. My thanks to the Executive Committee for their contribution to the editorial process of this document. This PDF version 1.3 is suitable for distribution. Any questions or suggestion for future inclusion in the FAQ should be directed to the ARRL Laboratory by email at tis@arrl.org. One of the ARRL Laboratory engineers will respond to comments by email. The responsibility for updates to this living-breathing document will now pass the ARRL Laboratory staff under the direction of Ed Hare, W1RFI; and the the RF Safety Committee under the lead of Dr. Greg Lapin, N9GL. As ARRL members, we are indeed very fortunate to have such a great assemblage of truly gifted authorities in the field of RF Engineering. Please be aware that updates might be very common as details come into better focus as the discussions between the FCC and the ARRL develop clarifications and recommendations. Thanks again to Ed Hare, W1RFI, for the authorship of this FAQ. 73, Kermit Carlson W9XA ARRL EMC Committee Chair _______________________________________________ arrl-odv mailing list arrl-odv@reflector.arrl.org https://reflector.arrl.org/mailman/listinfo/arrl-odv _______________________________________________ arrl-odv mailing list arrl-odv@reflector.arrl.org https://reflector.arrl.org/mailman/listinfo/arrl-odv
